1. Danco
#ad
NEXT BY DANCO Zero Cut Bolts | Brass Toilet Mounting Bolts | Toilet Repair | White Bolt Caps | Toilet Bolts Screws 10770
#adDanco #ad - Works for any toilet installation - if toilet bowl flange is above, below or flush with the floor our Zero Cut toilet mounting bolts can adjust to most situations. Package includes 2 stainless steel bolts, 2 slide adapters, 2 brass extenders, 2 lock nuts, 2 brass tee bolts, 2 alignment bullets, and 2 low profile caps.No tools or cutting required and will not damage or scratch the enamel. Upper bolt screws into doble threaded body while the LOWER BOLT retracts and tightens from below with extender included so bolts work with any toilet.
More information #ad
Adjustable height bolts without cutting - extension of up to 3 inches for just the right height with NO CUTTING required and comes with ALIGNMENT bullets that guides you to position toilet with ease. Sliding adapters tighten the bolts and attach the low-profile bolt caps.Brand | Danco #ad |
Manufacturer | Next by Danco #ad |
Height | 0.44 Inches |
Length | 3 Inches |
Weight | 0.2 Pounds |
Width | 0.44 Inches |
Part Number | 10770 |
Model | 10770 |
Warranty | Limited 1 year |
More information #ad
2. The Toilet Master
#ad
Washer, Easy to Repair, The Toilet Master Toilet Bolts is a No Tool, and Cap Kit, No Nut, No Cut, Service, and Install Toilet Bolt, Replace
#adThe Toilet Master #ad - First truly tool-free toilet bolt system. This is an individual kit which contains 2 bolts. Hi-impact plastic that will not break under normal use. No rust, no corrosion system with the cap as the fastener itself. On and off by hand, easy to remove, fast to install, reusable.More information #ad
Brand | The Toilet Master #ad |
Manufacturer | Junca Inventions Unlimited #ad |
Height | 4 Inches |
Length | 1.5 Inches |
Width | 6 Inches |
Part Number | TMB0012W |
Model | TMB0012W |
More information #ad
3. Stinky John's
#ad
Stinky John's Tall Toilet Bolt Caps- VARIETY PACK- both bolt diameters
#adStinky John's #ad - Stinky john tall toilet bolt caps are paintable! Match your colored toilet. Includes a set of caps for 1/4 inch and a set of 5/16 inch threaded bolts.More information #ad
Not sure of bolt size? Get both sizes! No more awkward bolt cutting. Screws on, stays on tall bolts! No more unsightly loose fitting caps. Instead of cutting the bolts, simply screw on Stinky John's bolt caps.Brand | Stinky John's #ad |
Manufacturer | Stinky John's #ad |
Part Number | 1 |
More information #ad
4. LASCO
#ad
Harvey's 014710 Toilet Flange Repair Stainless Steel Split Ring
#adLASCO #ad - Install around body of flange. Stainless steel. Split ring. Opens up for easy repair. Easy diy project; fits most.More information #ad
Brand | LASCO #ad |
Manufacturer | LASCO #ad |
Height | 7.5 Inches |
Length | 0.36 Inches |
Width | 7.5 Inches |
Part Number | 33-3736 |
Model | 33-3736 |
Warranty | N |
More information #ad
5. Oatey
#ad
White, 3-Inch, Oatey 43654 Flange Nuts
#adOatey #ad - No need to tear up existing floor. Replaces broken cast iron closet flanges. Installs easily without tools. Smooth unrestricted flow design.More information #ad
Smooth unrestricted flow design. Replaces broken cast iron closet flanges. Installs easily without tools. Gasket expands to fit service weight, heavy weight and no hub.Brand | Oatey #ad |
Manufacturer | Oatey #ad |
Height | 4 Inches |
Length | 7 Inches |
Weight | 0.5 Pounds |
Width | 7 Inches |
Part Number | 43654 |
Model | 43654 |
Warranty | 1-year limited |
More information #ad
6. Sioux Chief Mfg
#ad
Stainless Steel, Sioux Chief Mfg 886-MR 866-S3I S/S Closet Flange Ring, Pack of 1
#adSioux Chief Mfg #ad - Stainless Steel. Closet ring. This is highly durable. Fits under most closet flanges. Each ring raises the flange 3/4-Inch off the floor. Fits under most closet flanges.More information #ad
This is manufactured in United states. Each ring raises the flange 3/4-Inch off the floor. Stainless Steel. Closet ring. Flange repair ring 1 piece stainless Steel - 115485.Brand | Sioux Chief Mfg #ad |
Manufacturer | Sioux Chief Mfg #ad |
Height | 0.5 Inches |
Length | 7 Inches |
Weight | 0.05 Pounds |
Width | 7 Inches |
Part Number | 886-MR |
Model | 886-MR |
More information #ad
7. Oatey
#ad
Stainless Steel, for Use with 3 Or 4 in Closet Flanges, Oatey 42778 Replacement Ring
#adOatey #ad - Four mounting slots for proper fit and alignment of closet bolts to the toilet. 4-inch spigot closet flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor. All products are backed with the highest quality technical and customer support programs in the industry.
More information #ad
3-inch spigot closet flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting. Oatey products can be found in residential and commercial applications and have achieved excellent brand Name recognition with consumers. Highly durable product.Brand | Oatey #ad |
Manufacturer | Oatey #ad |
Height | 3 Inches |
Length | 4 Inches |
Width | 4 Inches |
Part Number | 42778 |
Model | 42778 |
Warranty | 1-year limited |
More information #ad
8. Fluidmaster
#ad
Fluidmaster 7530P8 Universal Better Than Wax Toilet Seal, Wax-Free Toilet Bowl Gasket
#adFluidmaster #ad - No minimum temperature required for installation. Seals on uneven floors or over tile floors with recessed flanges. No wax, no mess and can be repositioned; No-rust brass bolts & hardware. Fits any flange, any toilet. Plunging won't cause leaks; 10-year warranty.More information #ad
Brand | Fluidmaster #ad |
Manufacturer | Fluidmaster #ad |
Height | 2 Inches |
Length | 6 Inches |
Weight | 0.43 Pounds |
Width | 6 Inches |
Part Number | 7530P8 |
Model | 7530P8 |
More information #ad
9. Fluidmaster
#ad
For 3-Inch and 4-Inch Waste Lines, Fluidmaster 7513 Extra Thick Wax Toilet Bowl Gasket with Flange
#adFluidmaster #ad - No leaks: seal your toilet to the floor with extra thick protection. Easy-to-install: Even with or below the floor. Replace old, leaking wax seals with 40% more wax than standard wax seals. Bonus: Polyethylene flange included. Adaptable: fits 3” and 4” waste lines.More information #ad
Brand | Fluidmaster #ad |
Manufacturer | Fluidmaster #ad |
Height | 5.94 Inches |
Length | 5.94 Inches |
Weight | 0.55 Pounds |
Width | 1.94 Inches |
Part Number | 7513 |
Model | 7513 |
Warranty | 5 year warranty |
More information #ad
10. American Standard
#ad
EZ Install Toilets-White, American Standard 7381148-200.0200A Bolt Cap Kit
#adAmerican Standard #ad - Used by plumbers to repair American Standard products. Bolt cap kit, ez install toilets white. Genuine American Standard repair part. Check your repair part information for compatability.More information #ad
Brand | American Standard #ad |
Manufacturer | American Standard #ad |
Height | 1.49 Inches |
Length | 1.41 Inches |
Width | 1.26 Inches |
Part Number | 7381148-200.0200A |
Model | 7381148-200.0200A |
More information #ad