Pentek 156017-02 ST-1 3/4″ Stainless Steel Filter Housing

#ad
Pentair Industries 3/4" Stainless Steel NPT #ad - Holds standard double open end DOE filter cartridges. The sump is made of brushed stainless steel 304 for resistance to corrosion and high temperatures, and the head is made of nickel-plated brass for corrosion resistance. Filter housing for high pressure and hot water applications. It has a recommended flow rate of 10 gallons per minute gpm, a maximum operating pressure of 250 pounds per square inch psi, and a maximum operating temperature of 300 degrees F 149 degrees C.

Water filters are used in a wide range of applications, swimming pools, including drinking water purification, industrial processes, and irrigation, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization.

Pentek 156017-02 ST-1 3/4" Stainless Steel Filter Housing #ad - The performance of filters is measured by the minimum particle size that is blocked, the downstream concentration of unwanted chemicals, the maximum flow rate, the percentage of particles or microorganisms that are removed, and the amount of water that can be filtered before the filter must be replaced.

Maximum operating pressure of 250 psi. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance.

Brushed stainless steel 304 for resistance to corrosion and high temperatures.

#ad



Pentek 143216 Buna-N O-Ring for ST Series Housings

#ad
Pentair Industries 143216 #ad - This o-ring fits pentek st series stainless steel filter housings, which are used in various applications, swimming pools, such as drinking water purification, and industrial processes, among others. Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes.

The company, mn, founded in 1966 and headquartered in Minneapolis, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. This pentek 143216 buna-N O-ring is used to seal water filter housings. Fits pentek ST Series stainless steel housings. Buna-n for flexibility and abrasion resistance.

. O-ring for sealing water filter housings. Water filters are used in a wide range of applications, and irrigation, including drinking water purification, industrial processes, swimming pools, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems.

Pentek 143216 Buna-N O-Ring for ST Series Housings #ad - For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. The performance of filters is measured by the minimum particle size that is blocked, the downstream concentration of unwanted chemicals, the percentage of particles or microorganisms that are removed, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced.

They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization.

#ad



Pentek PD-25-934 Polypropylene Filter Cartridge, 9-7/8" x 2-1/2", 25 Microns

#ad
Pentair Industries PD-25-934 #ad - This polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of commercial drinking water and industrial filtration applications. Specificationsnominal filtration rating25 micronsInitial pressure drop at 2 gpm.

Pentek PD-25-934 Polypropylene Filter Cartridge, 9-7/8" x 2-1/2", 25 Microns #ad - It has a nominal filtration rating of 25 microns at an efficiency of 85%. It has an initial pressure drop of less than 2 pounds per square inch psi at a flow rate of 2 gallons per minute gpm, and operates over a temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. This pentek pd-25-934 polypropylene filter cartridge reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications.

The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release.

#ad



Pentek 143339 Head Nut Gasket for ST Series Housings

#ad
Pentair Industries 143339 #ad - Water filters are used in a wide range of applications, industrial processes, including drinking water purification, swimming pools, and irrigation, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the maximum flow rate, the downstream concentration of unwanted chemicals, and the amount of water that can be filtered before the filter must be replaced.

The company, mn, founded in 1966 and headquartered in Minneapolis, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. Reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 25 microns.

Pentek 143339 Head Nut Gasket for ST Series Housings #ad - Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

This pentek 143339 head nut gasket is used to seal Pentek ST Series stainless steel water filter housings. Temperature range of 40 to 175 degrees F 4. 4 to 79.

#ad



Pentek CBC-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 0.5 Micron

#ad
Pentair Industries CBC-10 #ad - Bonded pac media with polyolefin wraps and polyethylene netting. Nominal filtration rating of 05 micron. Buna-n for flexibility and abrasion resistance. Buna-n for flexibility and abrasion resistance. Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water.

They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization. Reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications.

Nominal filtration rating of 25 microns. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. Fits pentek ST Series stainless steel housings. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

Pentek CBC-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 0.5 Micron #ad - Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine FAC at a concentration of 2 ppm is reduced by at least 90%. H is height, the horizontal distance from left to right; D is depth, the vertical distance from lowest to highest point; W is width, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, adsorption, and microorganisms from water by means of a semipermeable barrier, or biological processes.

#ad



Pentek 244047 Mounting Bracket Kit for 1/4", 3/8" and 1/2" Housings

#ad
Pentek 244047 #ad - Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. Buna-n for flexibility and abrasion resistance. Reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 25 microns. Replacement head nut gasket for stainless steel water filter housings.

Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. Fits pentek ST Series stainless steel housings. Bracket comes with mounting screws. Bonded pac media with polyolefin wraps and polyethylene netting. Fits pentek ST Series housings. Buna-n for flexibility and abrasion resistance.

Pentek 244047 Mounting Bracket Kit for 1/4", 3/8" and 1/2" Housings #ad - O-ring for sealing water filter housings. Genuine OEM. This bracket features zinc plated steel suggested for interior applications. Initial pressure drop of less than 2 psi at a flow rate of 2 gpm. Bonded polypropylene microfiber for resistance to chemicals and bacteria. Initial pressure drop of 3.

#ad



Pentek 156018-02 ST-2 3/4" Stainless Steel Filter Housing

#ad
Pentair Industries ST-2 #ad - Nominal filtration rating of 05 micron. Reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 25 microns. Water filters are used in a wide range of applications, swimming pools, industrial processes, and irrigation, including drinking water purification, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The housing can be used with standard double open end DOE filter cartridges sold separately. Brushed stainless steel 304 for resistance to corrosion and high temperatures. Genuine OEM. This filter housing is for use in various applications, food service, including residential drinking water filtration, and humidifying systems, among others.

Specifications Maximum cartridge width 3. 0 inches 76 mm recommended flow rate 15 gpm maximum temperature 300 degrees f 149 degrees c maximum pressure 250 psi Maximum dimensions H x W 22-3/4 x 4-1/8 inches 578 x 105 mmH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Pentek 156018-02 ST-2 3/4" Stainless Steel Filter Housing #ad - Water filters remove undesirable particles, and microorganisms from water by means of a semipermeable barrier, chemicals, adsorption, or biological processes. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

#ad



Pentek PD-10-934 Polypropylene Filter Cartridge, 9-7/8" x 2-1/2", 10 Microns

#ad
Pentair Industries PD-10-934 #ad - It has an initial pressure drop of less than 2 pounds per square inch psi at a flow rate of 2 gallons per minute gpm, and operates over a temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. This polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of commercial drinking water and industrial filtration applications.

Pentek PD-10-934 Polypropylene Filter Cartridge, 9-7/8" x 2-1/2", 10 Microns #ad - Specificationsnominal filtration rating10 micronsInitial pressure drop at 2 gpm. This pentek pd-10-934 polypropylene filter cartridge reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. It has a nominal filtration rating of 10 microns at an efficiency of 85%.

The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release.

#ad



Pentek PD-1-934 Polypropylene Filter Cartridge, 9-7/8" x 2-1/2", 1 Micron

#ad
Pentair Industries PD-1-934 #ad - This polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of commercial drinking water and industrial filtration applications. SpecificationsNominal filtration rating1 micronInitial pressure drop at 2 gpm.

This pentek pd-1-934 polypropylene filter cartridge reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. It has an initial pressure drop of less than 2 pounds per square inch psi at a flow rate of 2 gallons per minute gpm, and operates over a temperature range of 40 to 175 degrees F 4.

Pentek PD-1-934 Polypropylene Filter Cartridge, 9-7/8" x 2-1/2", 1 Micron #ad - 4 to 79. 4 degrees C. It has a nominal filtration rating of 1 micron at an efficiency of 85%. The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release.

#ad



Pentek 156037.0 Mounting Bracket Kit with Screws

#ad
Reserve Filter Systems, Inc. 156037.0 #ad - Initial pressure drop of less than 2 psi at a flow rate of 2 gpm. Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. Initial pressure drop of less than 2 psi at a flow rate of 2 gpm. From the brand Name: Pentek. Reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications.

Nominal filtration rating of 10 microns. Initial pressure drop of less than 2 psi at a flow rate of 2 gpm. Reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 25 microns. Bonded polypropylene microfiber for resistance to chemicals and bacteria.

Pentek 156037.0 Mounting Bracket Kit with Screws #ad - Bracket with screws For 3/4" Pentek Ss Housings. Filter housing for high pressure and hot water applications. Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. Fits pentek ST Series housings. Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water.

#ad



Pentek 151118 OR-241 Silicone O-Ring for High Temperature Housings

#ad
Pentair Industries 151118 #ad - Reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 1 micron. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. O-ring for sealing filter housings. Initial pressure drop of less than 2 psi at a flow rate of 2 gpm.

From the brand Name: Pentek. Bracket with screws For 3/4" Pentek Ss Housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water.

Initial pressure drop of less than 2 psi at a flow rate of 2 gpm. Recommended flow rate of 15 gpm. Filter housing for high pressure and hot water applications. Bonded polypropylene microfiber for resistance to chemicals and bacteria. Brushed stainless steel 304 for resistance to corrosion and high temperatures.

Pentek 151118 OR-241 Silicone O-Ring for High Temperature Housings #ad - The performance of filters is measured by the minimum particle size that is blocked, the maximum flow rate, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, and the amount of water that can be filtered before the filter must be replaced.

It is made of food and drug Administration FDA approved silicone rubber for resistance to chemicals and extreme temperatures.

#ad